Here i am sharing step by step guide to safely Root & Install TWRP recovery On T-Mobile Galaxy S5 SM-G900T On Android Marshmallow 6.0.1 Official Firmware.You are here means you have already updated your T-Mobile Galaxy S5 G900T to the latest Official Android 6.0.1 Marshmallow Firmware or yo are planning to upgrade.The Good news is that now T-Mobile galaxy S5 can be rooted on Marshmallow 6.0.1 Firmware.Follow the Steps to Install TWRP recovery On T-Mobile Galaxy S5 SM-G900T and root it by flashing the SuperSu root file via TWRP recovery
PRE-REQUIREMENTS
Make sure your device has more than 40% battery
Device Must be running on Marshmallow official firmware
First enable USB debugging on your Galaxy S5 G900T smartphone, go to settings >> developers option. If developer's option isn't visible on your galaxy device, simply go about phone under settings and scroll down to build number, then tap build number up to 7 times to make developers option visible.
Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below
1.Switch off your device.
2.Press and hold "Home + Power + Volume down" buttons for a few seconds until you see a warning screen.
3.Press Volume Up on the warning screen to accept it and boot into Download mode.
4.Once your device is in download mode, connect it to the PC with a USB cable. The Odin will automatically detect the device and show an "Added!!" message.If not then your device is not connected properly
5.Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
6.Click the Start button on Odin to start Flashing and wait for it to finish the process.
Once it finished successfully, a pass message on the Odin screen will pop up
Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
Done!!! TWRP is now installed on your device.
Download and transfer the SuperSU to your device internal memory.
Then Just Select Install and flash the SuperSUfile that you transferred in the Previous step
Once flashing is done. Reboot your device.
Done!!! Your Android device is now root.
Links
TWRP http://ift.tt/2aBbfxp
supersu http://ift.tt/1TI2kbM
odin http://ift.tt/1sAZqLB
PRE-REQUIREMENTS
Make sure your device has more than 40% battery
Device Must be running on Marshmallow official firmware
First enable USB debugging on your Galaxy S5 G900T smartphone, go to settings >> developers option. If developer's option isn't visible on your galaxy device, simply go about phone under settings and scroll down to build number, then tap build number up to 7 times to make developers option visible.
Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below
1.Switch off your device.
2.Press and hold "Home + Power + Volume down" buttons for a few seconds until you see a warning screen.
3.Press Volume Up on the warning screen to accept it and boot into Download mode.
4.Once your device is in download mode, connect it to the PC with a USB cable. The Odin will automatically detect the device and show an "Added!!" message.If not then your device is not connected properly
5.Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
6.Click the Start button on Odin to start Flashing and wait for it to finish the process.
Once it finished successfully, a pass message on the Odin screen will pop up
Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
Done!!! TWRP is now installed on your device.
Download and transfer the SuperSU to your device internal memory.
Then Just Select Install and flash the SuperSUfile that you transferred in the Previous step
Once flashing is done. Reboot your device.
Done!!! Your Android device is now root.
Links
TWRP http://ift.tt/2aBbfxp
supersu http://ift.tt/1TI2kbM
odin http://ift.tt/1sAZqLB
from xda-developers http://ift.tt/2aBbyIB
via IFTTT
No comments:
Post a Comment