Ok so i managed to boot kitkat on PB1 bootloader safestrap works perfectly
I was on stock PB1 rooted and flashed NCGStocktar.md5 without a bootloader in flashfire the tar wouldnt flash in odin it would fail before writing anything then i rebooted into download mode before it booted and flashed NCG kernel then NCG Modem and rebooted set it up and rooted with towelroot and then installed safestrap apk and everything worked like its supposed to
1. Open Flashfire Grant it root access Click the plus in the bottom right hand corner and click flash firmware package choose the NCGStocktar.md5 and let it verify the MD5 then make sure boot, recovery, system and cache are selected make sure modem firmware and firmware are on checked then click the check mark in the top right hand corner then look for process cache click it and uncheck Enable and allow cache wipe then click that check mark then click everroot and uncheck inject SuperSu then click the check mark and then click Reboot and choose Download then click The plus again and choose Wipe make sure System Data, 3rd Party apps, dalvik cache, cache partition, cache partition format then click flash and click ok when it says it will go black for a second if its black for more than a minute pull the battery and retry
2. Once In Download Mode open odin and make sure your device shows up under ID:COM it should be like blue now click options and uncheck auto reboot and in AP choose the NCG Stock Kernel then click start then once thats done it shouldnt reboot click reset then choose the NCG Stock Modem then pull battery and power on the phone.
3.Set it up like new then install Towelroot and click make it rain it should say rooted no reboot required go to the play store and download SuperSU and open it it should say update SU binary click ok and choose normal Method once its done click reboot then download busybox and grant it root access then install it then download safestrap apk and grant safestrap root access then accept the license agreement and click install Safestrap Then click reboot to recovery and you should be in safestrap then choose system then reboot in safestrap and let it boot it will say safestrap disabled just click continue or wait 10 seconds and there you go you have kitkat
NCG Kernel: http://ift.tt/2arheSj
NCG Modem: http://ift.tt/2aOt1NK
NCG Stock Tar: http://ift.tt/2arhoZK
The files are in zips extract them with 7-zip or Winrar.
I was on stock PB1 rooted and flashed NCGStocktar.md5 without a bootloader in flashfire the tar wouldnt flash in odin it would fail before writing anything then i rebooted into download mode before it booted and flashed NCG kernel then NCG Modem and rebooted set it up and rooted with towelroot and then installed safestrap apk and everything worked like its supposed to
1. Open Flashfire Grant it root access Click the plus in the bottom right hand corner and click flash firmware package choose the NCGStocktar.md5 and let it verify the MD5 then make sure boot, recovery, system and cache are selected make sure modem firmware and firmware are on checked then click the check mark in the top right hand corner then look for process cache click it and uncheck Enable and allow cache wipe then click that check mark then click everroot and uncheck inject SuperSu then click the check mark and then click Reboot and choose Download then click The plus again and choose Wipe make sure System Data, 3rd Party apps, dalvik cache, cache partition, cache partition format then click flash and click ok when it says it will go black for a second if its black for more than a minute pull the battery and retry
2. Once In Download Mode open odin and make sure your device shows up under ID:COM it should be like blue now click options and uncheck auto reboot and in AP choose the NCG Stock Kernel then click start then once thats done it shouldnt reboot click reset then choose the NCG Stock Modem then pull battery and power on the phone.
3.Set it up like new then install Towelroot and click make it rain it should say rooted no reboot required go to the play store and download SuperSU and open it it should say update SU binary click ok and choose normal Method once its done click reboot then download busybox and grant it root access then install it then download safestrap apk and grant safestrap root access then accept the license agreement and click install Safestrap Then click reboot to recovery and you should be in safestrap then choose system then reboot in safestrap and let it boot it will say safestrap disabled just click continue or wait 10 seconds and there you go you have kitkat
NCG Kernel: http://ift.tt/2arheSj
NCG Modem: http://ift.tt/2aOt1NK
NCG Stock Tar: http://ift.tt/2arhoZK
The files are in zips extract them with 7-zip or Winrar.
from xda-developers http://ift.tt/2aOti3l
via IFTTT
No comments:
Post a Comment